Saphire Polymers

We manufacture FRP/GRP pipes and fitting that are made in various dimensions and shapes, fulfilling the need of various industries and purposes. The pipes and fitting manufactured by us can bear heat and high temperature and has the resistant power against chemical reactions like acid, alkali or salt. We manufacture and supply the FRP/GRP pipes and fitting whose friction correlation is low and its surface is not only smooth but it is clean and clear. The best part of these pipes and fitting is that they are inert to various acids and chemicals and it can last for long time. There are various benefits in FRP/GRP pipes and fitting manufactured by us like:

• construction without joints or welds.


• Non-corrosive and immune to galvanic or electrolyte erosion.


• UV resistant.


• Chemically inert to almost all kinds of chemicals within specific temperature.


• Used for transporting CLO2, Brine solution, H2SO4, NO2, Phosphoric acid, etc.


• Lightweight.


• Cost effective with assured quality.


• Excellent flow properties.


• Smooth inner surface.


• Nonflammable.

Cross Section of Pipe (Economy) Variety

• Inner Surface: The interior surface 0.25mm-0.5mm is a smooth resin rich gel coat made of Resin mixed with chemically inert aerosil producing a smooth surface for increasing the flow.



• Next Interior Layer: Laminate reinforced with 450 CSM glass fabric of two layers. Providing optimum corrosion-resistance when combined with the suitable resin for the specific chemical conditions.



• Remaining Thickness: Subsequent reinforcing layers of woven roving-chopped strand mat along with mild reacting resins are used to build the pipe to the desired wall thickness.



• Exterior Surface: The final chemically inert layer provides protection against weathering, fumes spillage and ultraviolet attack. This gives the pipe a longer life and reduces maintenance expenses.


Cross Section Of Pipe (Premium) Variety

• Inner Surface: The interior surface 0.25mm-0.5mm is a smooth resin rich gel coat made of resin mixed with chemically inert aerosil producing a smooth surface for increasing the flow.



• Next Interior Layer: Laminate reinforced with 450 CSM glass fabric of two layers. Providing optimum corrosion-resistance when combined with the suitable resin for the specific chemical conditions.



• Remaining Thickness: Same as above.



• Exterior Surface: The final chemically inert layer provides protection against weathering, fumes spillage and ultraviolet attack. This gives the pipe a longer life and reduces maintenance expenses.